Center for Tribology Research

Published Papers - Tribology

Tribology Testing of Lubricating Oils with Nano-Additives

Norm V. Gitis

Technische Akademie Esslingen 16th International Colloquium Tribology, January 15-18, 2008


Wirkflächenstrukturierte Keramik/Stahl-Paarungen für den Einsatz in ölgeschmierten Friktionssystemen

Kai Wauthier, Karl-Heinz Zum Gahr

GFT Proceedings, Gettingen, September 24-26, 2007


Friction and wear life evaluation of silane-based self-assembled monolayers on silicon surface

N.Satyanarayana, S.K.Sinha and M.P.Srinivasan
Life Cycle Tribology (Editors: D.Dowson, M.Priest, G.Dalmaz and A.A.Lubrecht)

Tribology and Interface Engineering Series, No. 48, Elsevier Publishers, 2004, P. No. 821-826.


Tribology of PFPE overcoated self-assembled monolayers deposited on Si surface

N.Satyanarayana and S.K.Sinha
Journal of Physics D: Applied Physics 38 (2005) 3512-3522.


Tribology of PFPE overcoated self-assembled monolayers deposited on silicon surface: Effect of thermal treatment

N.Satyanarayana and S.K.Sinha
WTC2005-64067, Proceedings of WTC 2005, World Tribology Congress ІІІ, Washington D.C., USA.


Tribology of a novel UHMWPE/PFPE dual-film coated onto Si surface

N.Satyanarayana, S.K.Sinha and Ong Boon Hong
Sensors and Actuators A: Physical 128 (2006) 98-108.


Tribological, mechanical and electrochemical properties of nanocrystalline copper deposits produced by pulse electrodeposition

Song Tao  and D Y Li
Department of Chemical and Materials Engineering, University of Alberta,
Edmonton, Alberta T6G 2G6, Canada

NANOTECHNOLOGY, Nanotechnology 17 (2006) 65–78


A comparative study of borided pure niobium, tungsten and chromium

Metin Usta a, Ibrahim Ozbek b, Cuma Bindal b, Ahmet Hikmet Ucisik c, S. Ingole d, H. Liang d

a Department of Materials Science and Engineering, Gebze Institute of Technology,
Gebze, Kocaeli 41400, Turkey

b Engineering Faculty, Department of Metallurgical and Materials Engineering, Sakarya University, Esentepe Campus, Sakarya 54187, Turkey

c Department of Prostheses, Materials and Artificial Organs, Institute of Biomedical Engineering, Bogazici University, Bebek, Istanbul 34342, Turkey

d Texas A & M University, College Station, TX 77843-3123, USA

Vacuum 80 (2006) 1321–1325


Application of an electrochemical scratch technique to evaluate contributions of mechanical and electrochemical attacks to corrosive wear of materials

X.Y. Wang, D.Y. Li
Department of Chemical and Materials Engineering, University of Alberta,
Edmonton, Alberta, Canada T6G 2G6

Wear 259 (2005) 1490–1496


Corrosion resistance and lubricated sliding wear behaviour of novel Ni–P graded alloys as an alternative to hard Cr deposits

Liping Wang a, b, Yan Gao a, Tao Xu a, *, Qunji Xue a, *

a State Key Laboratory of Solid Lubrication, Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences, Lanzhou 730000, PR China

b Graduate School of the Chinese Academy of Sciences, Beijing 100039, PR China

Applied Surface Science 252 (2006) 7361–7372


Effect of SiC particles on the friction and wear behavior of Ti3Si(Al)C2-based composites

D.T. Wan a, b, C.F. Hu a, b, Y.W. Bao a, Y.C. Zhoua

a Shenyang National Laboratory for Materials Science,
Institute of Metal Research, Chinese Academy of Sciences, 72 Wenhua Road,
Shenyang 110016, PR China

b Graduate School of Chinese Academy of Sciences, Beijing 100039, PR China

Wear xxx (2006) xxx–xxx


Effects of bivalent Co ion on the co-deposition of nickel and nano-diamond particles

Liping Wang, Yan Gao, Huiwen Liu, Qunji Xue, Tao Xu
State Key Laboratory of Solid Lubrication, Lanzhou Institute of Chemical Physics,
Chinese Academy of Sciences, Lanzhou 730000, PR China

Surface & Coatings Technology xx (2004) xxx– xxx


Effects of Y2O3 addition on microstructure, mechanical properties, electrochemical behavior, and resistance to corrosive wear of aluminum

W.B. Bouaeshi, D.Y. Li
Department of Chemical and Materials Engineering, University of Alberta,
Edmonton, AL, Canada T6G 2G6

Tribology International, September 2005


Electron work function, adhesion, and friction between 3d transition metals under light loads

Yanping Li*, D.Y. Li
Department of Chemical and Materials Engineering, University of Alberta, Room 536,
Edmonton, Alberta, Canada T6E 2G6

Wear 259 (2005) 1432–1436


Friction and wear properties of WC-Co and Mo-Mo2C based functionally graded materials

L. Prchlik a, b, S. Sampath a, J. Gutleber a, G. Bancke a, A.W. Ruff b

a Center for Thermal Spray Research, Department of Materials Science and Engineering, State University of New York, Stony Brook, NY 117941-2275, USA

b National Institute of Standards and Technology, Ceramics Division, Gaithersburg, MD 20 899, USA

Wear 249 (2001) 1103–1115


Graded composition and structure in nanocrystalline Ni–Co alloys for decreasing internal stress and improving tribological properties

LipingWang 1, 2, Yan Gao 1, Qunji Xue 1, Huiwen Liu 1 and Tao Xu 1, 3

1 State Key Laboratory of Solid Lubrication, Lanzhou Institute of Chemical Physics, Chinese, Academy of Sciences, Lanzhou 730000, People’s Republic of China

2 Graduate School of the Chinese Academy of Sciences, Beijng 100039, People’s Republic of China

JOURNAL OF PHYSICS D: APPLIED PHYSICS,  J. Phys. D: Appl. Phys. 38 (2005) 1318–1324


In situ reaction synthesis and characterization of Ti3Si(Al)C2/SiC composites

D.T. Wan a, b, Y.C. Zhou a, *, Y.W. Bao a, C.K. Yan a

a Shenyang National Laboratory for Materials Science, Institute of Metal Research, Chinese Academy of Sciences, 72 Wenhua Road, Shenyang 110016, PR China

b Graduate School of Chinese Academy of Sciences, Beijing 100039, PR China

Ceramics International 32 (2006) 883–890


Influence of pulse frequency on the microstructure and wear resistance of electrodeposited Ni–Al2O3 composite coatings

Li Chen a, b, Liping Wang a, b, Zhixiang Zeng a, b, Tao Xu a

a State Key Laboratory of Solid Lubrication, Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences, Lanzhou 730000, PR China

b Graduate School of Chinese Academy of Science, Beijing 100039, PR China

Surface & Coatings Technology 201 (2006) 599–605


Laser-induced combustion synthesis of Zr–Ti–Al–Ni amorphous-based alloysB

Yanfang Wang*, Cunshan Wang, Xuemin Pan, Chuang Dong
State Key Laboratory of Materials Modification and Department of Materials Engineering,
Dalian University of Technology, Dalian 116024, China

Materials Letters 59 (2005) 2574 – 2578


On the friction and wear behavior of PTFE composite filled with rare earths treated carbon fibers under oil-lubricated condition

Shangguan Qian-qian a, Cheng Xian-hua a,b,*

a School of Mechanical & Power Engineering, Shanghai Jiao Tong University, Shanghai 200030, PR China

b State Key Laboratory of Solid Lubrication, Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences, Lanzhou 730000, PR China

Wear 260 (2006) 1243–1247


Surface analytical studies of surface-additive interactions, by means of in situ and combinatorial approaches

A. Rossia, b, M. Eglin a, F.M. Piras a, 1, K. Matsumoto a, 2, N.D. Spencer a,*

a Laboratory for Surface Science and Technology, Department of Materials, Swiss Federal Institute of Technology, ETH-Zürich, Switzerland

b Department of Inorganic and Analytical Chemistry, University of Cagliari, INSTM, Cagliari, Italy

Wear 256 (2004) 578–584


Tribological behavior of ZnS-filled polyelectrolyte multilayers

Guangbin Yang, Hongxia Ma, Zhishen Wu, Pingyu Zhang
Laboratory for Special Functional Materials, Henan University, Kaifeng 475001, PR China

2006 Published by Elsevier B.V.    www.elsevier.com/locate/wear


LOW FRICTION RING PACK FOR GASOLINE ENGINES

Eduardo Tomanik, Andre Ferrarese
MAHLE – Brazil Tech Center

ASME ICEF Fall 2006, November 5-8, 2006, Sacramento, USA


Friction and wear of a rubber coating in fretting

Dae Kyun Baek, M.M. Khonsari
Department of Mechanical Engineering, Louisiana State University, 2508 CEBABuilding ,
Baton Rouge, LA 70803, USA

Published by Elsevier B.V., Wear 258 (2005) 898–905


Method of characterizing electrical contact properties of carbon nanotube coated surfaces

Onnik Yaglioglu, A. John Hart, Rod Martens, and Alexander H. Slocum
Precision Engineering Research Group, Department of Mechanical Engineering, Massachusetts Institute
of Technology, 77 Massachusetts Avenue, Cambridge, Massachusetts 02139

American Institute of Physics, published online 25 September 2006


Micro/Nanoscale Mechanical and Tribological Characterization of SiC for Orthopedic Applications

Xiaodong Li, Xinnan Wang, Robert Bondokov, Julie Morris, Tangali S. Sudarshan
Department of Electrical Engineering, University of South Carolina, 301 Main Street, Columbia, South Carolina 29208

Yuehuei H. An, 
Orthopaedic Research Laboratory, Medical University of South Carolina, 96 Jonathan Lucas Street, CSB708, Charleston,South Carolina 29425

Published online 10 November 2004 in Wiley InterScience (www.interscience.wiley.com)


Reibwertuntersuchungen an Motorenölen im Mikrotribometer

Grebe, M.; Feinle, P.
Tribologie-Fachtagung 2004: "Reibung, Schmierung und Verschleiß" in Göttingen
Tagungsband II, ISBN Nr. 3-00-003404-8, GfT, Moers, 2004


Integrated Tribo-SPM for Nano-Tribology

Norm Gitis, Antanas Daugela, Jun Xiao,
Center for Tribology, Inc. Campbell, California

1st Vienna International Conference on Micor- and Nano Technology; Vienna, Austria, March 9-11, 2005


Friction and wear characteristic of AZ91D magnesium alloy under dry friction reciprocating sliding motion

Ren Jun, Ma Ying, Chen Ti-jun, Xu Tao, Li Yuan-dong, Li Bing

State Key Laboratory of Advanced Nonferrous Materials, Lanzhou University of Technology, Lanzhou 730050

State Key Laboratory of Solid Lubrication, Lanzhou institute of Chemical Physics, Chinese Academy of Science, Lanzhou 730000

Proceeding of the 4th China International Symposium on Tribology, Xi'an, China; November 8-11 2004


Influence of KF on structure and tribological properties of Mg alloy's microarc oxidation coatings

Jun Liang, Baogang Guo, Jun Tian, Huiwen Liu, Jinfang Zhou, Tao Xu
State Key Laboratory of Solid Lubrication, Lanzhou institute of Chemical Physics, Chinese Academy of Science, Lanzhou 730000 P.R. China

Proceeding of the 4th China International Symposium on Tribology, Xi'an, China; November 8-11 2004


Structure and properties of novel lubrication and wear resistance gradient (LGM) Ni-Co nanocrystalline alloys

Liping Wang, Yan Gao, Qunji Xue, Huiwen Liu, Tao Xu
State Key Laboratory of Solid Lubrication, Lanzhou institute of Chemical Physics, Chinese Academy of Science, Lanzhou 730000 P.R. China

Proceeding of the 4th China International Symposium on Tribology, Xi'an, China; November 8-11 2004


Preparation and Characterization of Electrochemically Deposited Carbon Nitride Films on Silicon Substrate

Xingbin Yan, Tao Xu, Gang Chen, Sengrong Yang1, Huiwen Liu and Qunji Xue, 
State Key Laboratory of Solid Lubrication, Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences

Institute Of Physics Publishing, Journal Of Physics D: Applied Physics 37 (2004) 1–7


Characterization Of Hydrogenated Diamond-Like Carbon Films Electrochemically Deposited on a Silicon Substrate

X B Yan, T Xu, S R Yang1, H W Liu and Q J Xue, 
State Key Laboratory of Solid Lubrication, Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences

Institute Of Physics Publishing, Journal Of Physics D: Applied Physics 37 (2004) 2416–2424


Effects of Bivalent Co Ion on The Co-Deposition of Nickel and Nano-Diamond Particles

Liping Wang, Yan Gao, Huiwen Liu, Qunji Xue, Tao Xu, 
State Key Laboratory of Solid Lubrication, Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences

Surface & Coatings Technology (2004), 0257-8972


Microstructure and Mechanical Properties of Hard Carbon Films Prepared by Heat Treatment of a Polymer on Steel Substrate

Xingbin Yan, Tao Xu, Xiaobo Wang, Huiwen Liu, Shengrong Yang, 
State Key Laboratory of Solid Lubrication, Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences

Surface & Coatings Technology (2004), 0257-8972


Contact CETR to discuss your testing needs in detail, for more information and pricing or to set up an appointment to visit our lab in Northern California. You will surely be pleased with our wide expertise, unique equipment and friendly effective services.