ASTM Standard Tests

ASTM D638-02
ASTM D3039/D3039M-00

Measurement of Tensile Properties of Plastics and Composites on Universal Materials Tester mod. CETR-UMT 2 (.pdf)

Test Method to measure Rockwell Hardness of Plastics and Electrical Insulating Materials Using the CETR-UMT 3 (.pdf)

Test Method for Low-Temperature Torque of Ball Bearing Grease Using the CETR-UMT 2 (.pdf)

Test Method for Static and Kinetic COF of Plastic Film and Sheeting Using the CETR-UMT 2 (.pdf)

ASTM D2240-00

Test Method for Measuring the Shore Hardness of Soft Materials Using the CETR-UMT 2 or CETR-APEX (.pdf)

Standard Test Method for Wear Preventive Characteristics of Lubricating Grease Using the CETR-UMT 3 (.pdf)

ASTM D2509–03

Measurement of Load-Carrying Capacity of Lubricating Grease Using the CETR-UMT 3 (.pdf)

ASTM D2981-94 (reapproved 1998) and ASTM D3704-96 (reapproved 2001)

Block-on-Oscillating-Ring Test Using Micro-Tribometer mod. CETR-UMT 2 (.pdf)

ASTM D3702-94 (Reapproved 1999)

Standard Test for Wear Rate and COF of Materials in Self-Lubricating Rubbing Contact with a Thrust Washer Using the Micro-Tribometer mod. CETR-UMT 2 (.pdf)

Test Method for Measuring Static Friction of Coating Surfaces Using the CETR-UMT 2 or CETR-APEX (.pdf)

ASTM D5706–97 (Reapproved 2002)

Standard Test Method for Determining Extreme Pressure Properties of Lubricating Greases Using the CETR-UMT 3 in a High Frequency, Linear Reciprocating configuration (.pdf)

ASTM D6078–99

Standard Test Method for Evaluating Lubricity of Diesel Fuels Using the CETR-UMT 3 in a Ball-on-Cylinder configuration (.pdf)

ASTM D6079-02

Standard Test Method for Evaluating Lubricity of Diesel Fuels Using the CETR-UMT 2 in a Fast Reciprocating configuration (.pdf)

ASTM D6425-99

Standard Test Method for Measuring Friction and Wear Properties of Extreme Pressure (EP) Lubricating Oils using the Micro-Tribometer mod. CETR-UMT 3 (.pdf)

ASTM E18-05

Test Methods for Rockwell Hardness and Rockwell Superficial Hardness of Metallic Materials (.pdf)

ASTM E92-03
ASTM E384-99

Vickers and Knoop Hardness Tests Using a Diamond Indenter on the Universal Materials Tester (.pdf)

ASTM F732-82 (reapproved 1991)

Evaluation of Friction and Wear Properties of Polymeric Materials for Use in Total Joint Prostheses using Micro-Tribometer mod. CETR-UMT 2 (.pdf)

ASTM G75-95

Determination of Slurry Abrasivity (Miller Number) and Slurry Abrasion Response of Materials (SAR Number) Using Micro-Tribometer mod. CETR-UMT 2 (.pdf)

ASTM G77-98

Standard Test Method for Ranking Resistance of Materials to Sliding Wear In Block-on-Ring Wear Test Using Micro-Tribometer mod. CETR-UMT 2 (.pdf)

ASTM G83 – 96

Cross-Cylinder Test Using Micro-Tribometer mod. CETR-UMT 2 (.pdf)

ASTM G99-95

Pin on Disk Sliding Wear Using the Micro-Tribometer mod. CETR-UMT2 (.pdf)

ASTM G132-96

Pin Abrasion Testing Using the Micro -Tribometer mod. CETR-UMT 2 (.pdf)

ASTM G133-95 (reapproved 2002)

Ball on Flat Sliding Wear Test Using the Micro-Tribometer mod. CETR-UMT 2 (.pdf)

ASTM G137-97

Standard Test Method for Ranking Resistance of Plastic Materials to Sliding Wear in a Block-on-Ring Configuration Using Micro-Tribometer mod. CETR-UMT 2 (.pdf)

ASTM G143-96

Standard Test for Measurement of Web/Roller Friction Characteristics Using the Micro-Tribometer mod. CETR UMT-2 (.pdf)

ASTM G171-03

Scratch Hardness Test Using a Diamond Stylus on the Micro-Tribometer mod. CETR-UMT 2 (.pdf)

ASTM G176-03 

Standard Test Method for Ranking Resistance of Plastics to Sliding Wear in Block-on-Ring Wear Test (Cumulative Wear Method) Using Micro-Tribometer mod. CETR-UMT 2 (.pdf)

DIN 53 513

Standard Test Method for Determination of Viscoelastic Properties of Elastomers Using the Micro-Tribometer mod. CETR-UMT 2 (.pdf)