管理: Dr. Norm V. Gitis

教育

博士论文

1983年，莫斯科，边界润滑摩擦力的表面粗糙度优化

工作经历

专业的社会活动/协会会员

摩擦和润滑工程师协会摩擦技术分会，主席

ASTM G-02.40磨损分会，副主席

美国机械工程师协会摩擦部，会员

国际磁盘驱动设备和材料协会，会员

技术会议/论文集

第十四届国际摩擦学和摩擦测量学会议主席和组织者 论文集（见附件）：美国（圣何塞、底特律、夏威夷、休斯顿、拉斯维加斯、纳什维尔、奥兰多、匹兹堡、）、奥地利（维也纳）、加拿大（卡尔加里）、日本（盛冈、横滨）、乌兹别克斯坦（塔什干）

技术报告

在第四十届国际会议和论文集会议上应邀发言，来自大学和科研中心组织的研讨会超过20个，120个公司的工业研究工程中心来自美国、中国、中国香港、爱尔兰、日本、韩国、荷兰、俄罗斯、新加坡、中国台湾和泰国（详见附件）。

荣誉

1997年，获得硅谷成长最快的公司CEO

2002年，吉林大学客座教授

1992年，日本摩擦协会荣誉会员

1978年，获得“劳厄”综合性论文毕业生

专利

美国专利 (关于摩擦学)

1.      Patent 6,363,798 of Apr 2, 2002. Method and Device for Measuring Forces, (with M. Vinogradov, et al), filed July 24, 2000.

2.      Patent No 6,324,918 of Dec 4, 2001. Bi-directional Force Sensor, (with M. Vinogradov, et al.), filed June 5, 2000.

3.      Patent 5,795,990 of Aug 18, 1998. Method and Apparatus for Measuring Friction and Wear Characteristics of Materials, (with L. Levinson, et al.), filed July 30, 1997.

4.      Patent Approved on Oct 11, 2001. Method and Apparatus for Measuring Friction and Wear, (with M. Vinogradov, et al), filed July 24, 2000.

5.      Patent Approved on Feb 25, 2002. Microscratch Test Method, (with M. Vinogradov), filed Sept 25, 2000.

6.      Patent Pending. Microscratch Test Indenter, (with M. Vinogradov), filed Sept 25, 2000.

美国专利 (关于精确抛光)

1.      Patent No 6,257,953 of July 10, 2001. Method and Apparatus for Controlled Polishing, (with M. Vinogradov), filed Sept 25, 2000.

2.      Patent Approved on Apr 20, 2002. Method and Apparatus for Polishing, (with M. Vinogradov), filed May 17, 2001.

3.      Patent Pending. Method and Apparatus for Polishing Control, (with M. Vinogradov), filed Sept 17, 2001.

美国专利(关于磁盘驱动)

1.      Patent No 5,455,727 of Oct.3, 1995. Transducer-Suspension Assembly, (with D. Baral, et al.), filed Aug.9, 1994.

美国专利 (关于颗粒探测)

1.      Patent Pending. Method and Apparatus for Detecting Powders, (with A. Meyman, et al.), filed Jan 4, 2002.

美国专利 (关于外科仪器)

1.      Patent Pending. Multi-portal Device and Method for Percutaneous Surgery, (with T. Alamin, et al), filed May 10, 2002.

2.      Patent Pending. Multi-Cannula Device and Method for Percutaneous Surgery, (with T. Alamin, et al), filed May 21, 2002.

前苏联专利 (关于减磨涂层设计)

1.      Patent No 1,545,576. Composition for an Antifrictional Composite Material, (with A. Lapidus, et al.). Priority 3/14/88, registered 10/22/89, unpublished as state secret.

2.      Patent No 1,490,924. Epoxy Compound for Antifrictional Wear-Resistant Coatings, (with A. Lapidus, et al.). Priority 9/7/87, registered 3/1/89, unpublished as state secret.

3.      Patent No 1,436,654. Magnetic Devise for Unloading of Frictional Joints, (with A. Lapidus, et al.). Priority 6/7/87, registered 8/4/88, unpublished as state secret.

4.      Patent No 1,413,830. Method of Mechanical Treatment of Machine Tool Slideways, (with D. Levit and B. Fragin). Published Bull. 28, 1988.

5.      Patent No 1,368,519. Sliding Bearing, (with A.Lapidus). Published Bull. 3, 1988.

前苏联专利(关于摩擦测试)

1.      Patent No 1,448,887. Method for Testing Antifrictional Properties of Lubricants. Priority 12/2/86, registered 9/1/88, unpublished as state secret.

2.      Patent No 1,377,668. Test Method for Friction-Induced Vibrations, (with A. Lapidus). Published Bull. 8, 1988.

3.      Patent No 1,352,317. Method for Monitoring Friction Process, (with G. Saruchev, et al.). Published Bull. 42, 1987.

4.      Patent No 1,307,310. Method for Monitoring Degree of Seizure, (with B. Chizhov and A. Lapidus). Published Bull. 16, 1987.

5.      Patent No 1,043,566. Method of Lubricant Testing, (with I. Kragelskii). Published Bull. 35, 1983. 

6.      Patent No 1,029,043. Method and Device for Lubricant Testing, (with N. Alekseev, et al.). Published Bull. 26, 1983.

发表的论文

摩擦力基本原理和粘滑

1. Nature of Friction Coefficient: Panel Discussion. Lubrication Engineering, 4, 1995, (with C.DellaCorte).

2. Mechanism of Frictional Auto-Oscillations. Proceed. 6th Internat. Congress on Tribology Eurotrib'93, Budapest, Vol. 3, 1993, 428 - 433.

3. Nature of Stick-Slip Effect. Tribology and Mechanics of Magnetic Storage Systems, Vol. 7, STLE SP-29, 1990, pp. 107 - 113.

4. Discussion on Stick-Slip and Velocity Dependence of Friction at Low Speeds. Transact. ASME: Journ. of Tribology, Vol. 113, 1991.               

5. Effect of Slideway Materials on Positioning Accuracy of Moving Units in Machine Tools. Soviet Engineer. Research, Vol. 9, No 4, 1989, (with B.Chizhov).

6. Self-Induced Vibrations in the Transversing Units on Machine Tool Slideways. Soviet Engineer. Research, Vol. 8, No 4, 1988, (with B.Chizhov and A.Lapidus).

7. Study of Characteristics of Mixed Friction in Sliding Guideways. Soviet Journ. of Friction and Wear, Vol. 9, No 4, 1988, (with A.Lapidus and B.Chizhov)

8. FRICTIONAL AUTO-OSCILLATIONS, (in Russian), Moscow, Science Press, 1987, (with I.Kragelskii).

9. Investigation into the Characteristics of Mixed Friction in Slideways. Soviet Engineer. Research, Vol. 7, No 11, 1987, (with B.Chizhov and A.Lapidus)

10. Effect of Contact Pressure on the Stick-Slip Properties of Sliding Guideways. Soviet Engineer. Research, Vol. 7, No 1, 1987, (with B. Chizhov).  

11. METHODS OF FRICTION AND STICK-SLIP REDUCTION IN MACHINE TOOLS, (in Russian), Moscow, Engineering Press, 1986.

12. Study of Anti-Stick-Slip Properties of Machine Tool Guideway Materials. Soviet Journ. of Friction and Wear, Vol. 7, No 5, 1986. 

表面粗糙度和波纹

1. Roughness Optimization of Slideways. Soviet Engineer. Research, Vol. 5, No 11, 1985, (with A. Lapidus).

2. Influence of the Machining Marks Direction on Friction in Boundary Lubrication. Soviet Engineer. Research, Vol. 5, No 3, 1985, (with I. Kragelskii).   

3. Use of Acoustic Emission Method to Optimize Friction Surface Microrelief. Soviet Journ. of Friction and Wear, Vol. 5, No 5, 1984, (with I. Kragelskii, et al.).

4. Optimization of Surface Microgeometry at Boundary Friction. (In Russian), Ph.D. Thesis. Moscow, Institute of Machine Sciences of the USSR Academy of Sciences, 1983.

5. Investigation and Optimization of Surface Microgeometry. Quality Control and Properties of Machine Parts, (in Russian), Kiev, Vol. 3, 1980.

6. Determination of Curvature Radii on the Actual Surfaces of Spur Gears. Russian Engineer. Journ., Vol. 60, No 7, 1980, (with L. Shemper).

7. Changes in Microgeometry of Gear Teeth During Running-in. Machine Parts, (in Russian), Vol. 21, 1978, (with J. Kotov and S. Filipovich).  

润滑油和润滑

1. Investigation of Processes in Thin Lubricant Films and Their Effects on Friction. Proceed. 8th Confer. on Colloidal Chemistry and Physico-Chemical Mechanics, (in Russian), Tashkent, 1983, (with I.Kragelskii).

2. Calculations of the Activation Energy for a Film Starvation Effect. Tribotechnics for Engineering, (in Russian), Moscow, 1983, (with I.Bujanovskii and A.Ginzburg).

3. Investigation of the Film Starvation and its Prevention. Tribotechnics for Engineering, (in Russian), Moscow, 1983.

4. Evaluation of Film Starvation Tendency of Greases. Soviet Journ. of Friction and Wear, Vol. 4, No 1, 1983, (with I. Kragelskii).

5. Evaluation of Anti-Frictional Properties of Lubricants, (in Russian). Theoretical and Applied Problems of Wear-Resistance in Engineering, Leningrad, 1982.

6. Evaluation of Antifrictional Properties of Thin Lubricant Films. Soviet Physics Articles / USSR Academy of Sciences, Vol. 27, No 8, 1982, (with I. Kragelskii).

7. An Experimental Study of the Film Starvation Effect. Soviet Journ. of Friction and Wear, Vol. 3, No 3, 1982, (with I. Kragelskii, et al.)

8. Analytical Model of Film Starvation Conditions for Adsorptive and Chemisorptive Mechanisms of Film Recovery. Problems of Friction and Wear, (in Russian), Vol. 21, 1982, (with V.Kelle and I.Kragelskii).

固体轴承的减磨材料和设计

1. Magnetic Unloading of Sliding Bearings and Guideways. News of Machinebuilding, (in Russian), No 2, 1991, (with A.Lapidus, et al.).

2. Advances in Tribology: Slideway Design and Unloading Systems. Emerging Technology in the Soviet Union, Delphic Ass., Washington, 1990.

3. How Epilamine Coating Affects the Stick-Slip Properties of Slideways. Soviet Engineer. Research, Vol. 8, No 9, 1988, (with A.Lapidus and B.Chizhov).

4. PLASTIC AND COMPOSITE MATERIALS FOR SLIDING GUIDEWAYS, (in Russian), Moscow, Engineering Press, 1987.

5. Comprehensive Tribological Tests for Slideway Materials. Tribotechnics for Engineering, (in Russian), Moscow, 1987.

6. Assessing the Anti-Stick-Slip Properties of Slideway Materials. Soviet Engineering Research, Vol. 6, No 3, 1986.

7. Antifrictional Polymers and Composites for Machine Tool Slideways. Wear in Machines and Methods of Its Reduction, (in Russian), Brjansk, 1985, (with A.Lapidus, et al.).

8. Increasing the Wear-Resistance of Slideways. Soviet Engineer. Research, Vol. 4, No 10, 1984, (with I.Kragelskii).

捕获和磨损

1. Investigation of Non-Thermal Seizure in Machines. Metalcutting Machine Tools, (in Russian), Vol. 11, Kiev, 1983.

2. Effect of Mechanical Characteristics of Metals on the External Friction Threshold. Problems of Friction and Wear, (in Russian), Vol. 22, 1982.

3. Role of Microgeometry in Non-Thermal Seizure Development at Boundary Friction. Mechanical Sciences - Machinovedeniye, No 1, 1982.

4. Reliability of Machine Assemblies and External Friction Threshold. Reliability in Machines, (in Russian), Kuibyshev, 1981.

5. Evaluation of Non-Thermal Seizure in Spur Gears. Proceed. Internat. Confer. JUGOMA-80, (in Serbo-Croatian), Split, 1980, (with I.Kragelskii).

6. Study of Geometric Conditions of the External Friction Threshold for Cylindrical Gearing. Soviet Journ. of Friction and Wear, Vol. 1, No 6, 1980, (with I.Kragelskii).

晶片抛光和平板化

1. Quantitative Evaluation of CMP Process and Materials Using a CMP Tester. Proceed. 2^nd Intern. Conf. on Microelectronics and Interfaces, Santa Clara, February 2001 (with M. Vinogradov).

2. Quantitative Evaluation of a CMP Process Using a Bench-top CMP Tester. Proceed. 6^th Intern. CMP-MIC Conf. on Chemical-Mechanical Planarization, March 2001, (with M. Vinogradov).

3. Quantitative Functional Testing of CMP Materials Using a Bench-top CMP Tester. Proceed. 18^th Intern. VMIC Conf. on Multilevel Interconnection, Santa Clara, September 2001 (with M. Vinogradov).

磁盘驱动的摩擦学

1. Metrology for Micro-Tribology. Proceed. MIPE’97, Tokyo, July 1997, pp. 431-434.

2. Tribology of Near-contact Magnetic Recording. Proceed. IDEMA Tribology Symposium, Santa Clara, May 1996, pp. 117 - 130. 

3. Challenges of and Ways to Achieve In-contact and Near-contact Recording. Proceed. IDEMA Head/Media Interface Synposium, San Jose, September 1994, pp. 47 - 58. 

4. Phenomenon of Stiction in a Magnetic Head-Disk Interface. Proceed. ASME Energy-Sources Confer., PD-Vol.61, New Orleans, January 1994, pp.11- 15.

5. Tribology of a Magnetic Head-Disk Interface with a Smooth Disk. Proceed. MIT Tribology Symposium, Cambridge, July 1993.

6. Study of Low Flying Height Using Acoustic Emission and Friction Techniques. Advances in Information Storage Systems, Vol. 6, 1995, pp. 107 - 120, (with C.Gerber).

7. Stiction Phenomenon in the Magnetic Disk-Slider Interface. Proceed. 6th Internat. Congress on Tribology Eurotrib'93, Budapest, Vol. 3, 1993, pp. 417 - 422. 

8. Experimental Study of Stationary Head-Disk Contact in Magnetic Disk Drives. Transact. ASME: Journ. of Tribology, Vol. 115, 1993, pp. 214 - 218 (with R.Sonnenfeld).

9. Nature of Static Friction Time-Dependence. Journ. Physics D: Applied Physics, Vol. 25, 1992, pp. 605 - 612, (with L.Volpe).

10. A Technique to Study Effects of Volatile Pollutants on Stiction in Magnetic Disk Drives. Advances in Information Storage Systems, Vol. 4, 1992, pp. 277 - 289, (with L.Volpe and C.Brown)

11. Long-Term Stiction at the Magnetic Thin-Film Disk-Slider Interface. Advances in Information Storage Systems, Vol. 3, 1991, pp. 91 - 106, (with L.Volpe and R.Sonnenfeld).

机械可靠性

1. Robotized Machine Tools: Nomenclature of Reliability Indices. Standard of Soviet Engineering Industry RM 2N00-83, (in Russian), Moscow, 1983, (with V. Tauzhnanskii, et al.) 

2. Analytical Selection of Methods to Increase the Machine Tool Reliability. Metalcutting Machine Tools, (in Russian), Vol. 10, Kiev, 1982.

3. Machine Tools: Meantime till Repairs. Standard of Soviet Machinebuilding Industry OST 2N00-13-80, (in Russian), Moscow, 1980, (with V. Tauzhnanskii, et al.).

Dr. Norm V. Gitis 主持和组织的技术会议

Dr. Norm V. Gitis - 主要的陈述名单

会议

大学和学术

Corporations